You are here

Release Note Archive



Release Notes 3.17.1.RC1

Wednesday, April 12, 2017 - 00:00

 

Release Notes 3.17.1.RC1

These notes accompany our 3.17.1.0 Release Candidate-1 and describe changes since our last major production release, v3.16.1.0.

New Device Support

Added support for additional Ubiquiti devices which are now flagged as “In testing”:

  • AirGrid M5 (XW)
  • NanoBeam M5-16 (XW)
  • NanoBeam M5-19 (XW)
  • NanoStation Loco M5 (XW)
  • NanoStation M5 (XW) (in 3.16.1.0)
  • Rocket M5 (XW)
  • Rocket M5 (with GPS)
  • PowerBeam M2-400​
  • PowerBeam M5-300​
  • ​PowerBeam M5-400
  • Added support for newer TP-Link device revisions:
    • CPE210 v1.1

Security Fixes

  • SCS-2017-001 – High Severity
    • A remote Denial of Service flaw impacting ALL RELEASES of the ...
Read More



Release Notes 3.16.1.1

Friday, March 3, 2017 - 23:00

 

The AREDN™ Project announces its release of version 3.16.1.1 firmware

This release is a security patch release from our previous 3.16.1.0 release. It is recommended to upgrade all AREDN nodes to 3.16.1.1.

OTA Upgrade Note

In a future release tunnels will be required to be disabled prior to upgrades being permitted on a mesh node.
If you are running a tunnel server or client it is recommended the following steps be performed as in the future similar steps will be mandatory.
  1. Disable all tunnel server/client connections
  2. Reboot
  3. Apply the 3.16.1.1 upgrade
  4. Re-install tunnels packages
  5. Enable previously disabled tunnel connection

 
The following changes have been made from our previous, v3.15.1.0, production release:

Notable Security Patches

  • SCS-2017-...
Read More



Release Notes 3.16.1.0

Thursday, May 12, 2016 - 00:00


Release Notes for AREDN v3.16.1.0

This release focuses primarily on improving data rates and node manageability. The following changes have been made from our previous, v3.15.1.0, production release:

Data Rate Increase

  • 802.11n has been added to the RF protocol.  This improves the maximum data rate capability from 54 Mbps to 130 Mbps and allows AREDN nodes to take advantage of the Ubiquiti MIMO (concurrent data channels in both the vertical and horizontal polarization domains), although proportional data rate increases can also be achieved on non-MIMO devices

New Device Support

  • Added support for the Ubiquiti AirRouter and AirRouter HP.  These are desktop devices with an embedded a 5-port Ethernet switch we have preconfigured for WAN, LAN (ports 1-3) and DtD (port 4)

Upgradability

... Read More



Release Notes 3.16.1.0b02

Sunday, April 3, 2016 - 00:00


The AREDN Project Announces the Release of its Beta Test v3.16.1.0b02

This is the second beta release of the anticipated v3.16.1.0 which focuses on improving data rates and node manageability.  The following changes have been made from our previous beta v3.16.1.0b01 release:

 

  • Improved the operation of the distance parameter Kilometers / Miles entry
  • Added a “busy spinner” on the SNR Chart to indicate data is being collected and to wait for results
  • Added a disclosure statement on what gets uploaded with the optional LAT/LON “push” and how it will be used in publishing the public AREDN map
  • Fixed an intermittent upgrade failure with “keep settings”
  • Increased the Firmware Upload script timeout from 90 to 240 seconds to allow sufficient time for remote nodes to be updated on marginal links
  • Resolved a DNS issue with node name changes...
Read More



Release Notes 3.16.1.0b01

Wednesday, January 27, 2016 - 00:00


The AREDN Project Announces the Release of its Beta Test v3.16.1.0b01

This release focuses on improving data rates and node manageability. The following changes have been made from our previous, v3.15.1.0, production release:

  • 802.11n has been added to the RF protocol.  This improves the maximum data rate capability from 54 Mbps to 130 Mbps and allows AREDN nodes to take advantage of the Ubiquiti MIMO (concurrent data channels in both the vertical and horizontal polarization domains), although proportional data rate increases can also be achieved on non-MIMO devices
  • Added support for the Ubiquiti AirRouter HP, a desktop device with an embedded a 5-port Ethernet switch we have preconfigured for WAN, LAN (ports 1-3) and DtD (port 4)
  • Added ability for packages, such as iPerf, to open firewalls ports at the time of installation
  • The distance parameter entry is now...
Read More



Release Notes 3.15.1.0

Tuesday, December 22, 2015 - 00:00


The AREDN™ Project announces its release of version 3.15.1.0 firmware  

 
This release advances the objectives of the AREDN™ Project: to provide quality high-speed data solutions for the Amateur Radio based Emergency Communications community.  Hams have been waiting eagerly for the features contained in this release… many of whom got an early peek at them from testing the beta versions throughout the past several months. 

The following changes have been made from the previous, 3.0.2, production release:
 

  • Added support for the following devices:
    • Ubiquiti 3.4 GHz NanoBridge M3, NanoStation M3, Rocket M3
    • Ubiqiuti 5.8 GHz NanoStation M5 (XW version)
    • TP-Link 2.4 GHz CPE320, and 5.8 GHz CPE510
  • Expanded channel support:
    • 2.4 GHz now offers channels -1 and -2 which are not shared with WIFI routers
    • 3....
Read More

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer